2Lift / Products / Lifters / N-Line / N-150

N-150

N-150:
Lightweight and Strong Industrial Lifting Equipment

Lightweight and strong industrial lifting equipment for demanding environments.

The N-150 is our lightest lifter on the N-line. 

This piece of industrial lifting equipment is easy to manoeuvre and highly adaptable, the N-150 is one of the most versatile lifters on the market.

With twice the battery capacity of most similar liters, the N-150 is designed for prolonged daily use in demanding industrial environments.

Capable of lifting up to 150 kg (including the mounted lifting tool)  and able to utilise almost all of our lifting tools, both simple, manual and electric, the N-150 is the obvious choice for lifting and handling tasks where the weight is in the low to medium range.

Features

  • Self-locking gear system for safety and accuracy. In case of electrical failure the mechanical system automatically brings the lifter to an immediate standstill.
  • Large battery capacity with charge-state indicator. The large battery capacity allows for prolonged use of the lifter, even with the addition of electrical lifting tools.
  • Easily customizable: height of lifting column and dimensions of wheel base can be modified to customer specifications.
  • Rugged construction for industrial use. With its all-steel construction, the N-150 is built to last and for use in demanding industrial environments. Featuring a fully welded wheel base, these lifters do not become loose or wobbly even after many years of intensive use.
  • Ergonomic handle designed to allow the user multiple different grips depending preference and situation.
  • Robust remote control specifically designed for our lifters. Where practically all other lifters use a remote control with a plastic housing, our remote control features a full metal body and a high quality PU spiral cable. These remote controls do no crack or break when dropped and the cable remains flexible even after many years of use.
  • Dual speed lifting and lowering. The control unit and remote control allow for either full speed operation or lifting at a reduced speed. The reduced speed is pre-set to the desired value on the control unit.
  • Large range of lifting tools: both electrical and non-electrical lifting tools are available.
  • Cambelt drive: The use of an AT-10 cambelt ensures smooth, reliable operation with no need for lubricants or continuous maintenance.
  • Wheels and castors: We use non-marking wheels and swivel castors with quality bearings making the lifter easy to maneuver. A large selection of different wheels are available to ensure that they suit different height requirements and floor surfaces.
  • Electronic overload protection – immediately stops all movement if lifter is overloaded.

N-150 Industrial Lifting Equipment: Product Data

 N-150LN-150MN-150HN-150HSP
Lifting Capacity150 kg150 kg150 kg150 kg
Total Height1.500 mm1.975 mm2.350 mm1.300-3.500 mm
Footprint (LxW)828×577 mm828×577828×577828×577
Stroke1.000 mm1.480 mm1.850 mm805-3.005 mm
Lifting Speed – No load130 mm/s130 mm/s130 mm/s130 mm/s
IP-rating31313131
Rear Wheelsø150 mm – Central Brakeø150 mm – Central Brake ø150 mm – Central Brake ø150 mm – Central Brake 
Front WheelsSwiveling ø50 mmSwiveling ø50 mmSwiveling ø50 mmSwiveling ø50 mm
Surface TreatmentPowder Coat – RAL 9007Powder Coat – RAL 9007Powder Coat – RAL 9007Powder Coat – RAL 9007
Battery Capacity24 V – 18 Ah 24 V – 18 Ah24 V – 18 Ah24 V – 18 Ah
Battery ChargerBuilt in – 24 V 3.5 ABuilt in – 24 V 3.5 A Built in – 24 V 3.5 ABuilt in – 24 V 3.5 A
Power Supply110-230 V AC110-230 V AC110-230 V AC110-230 V AC
Control UnitSolid-state PLCSolid-state PLCSolid-state PLCSolid-state PLC
User Control SystemRemote control with E-stop for manipulatorsRemote control with E-stop for manipulators Remote control with E-stop for manipulatorsRemote control with E-stop for manipulators
Overload Protection Current monitor with cut-offCurrent monitor with cut-offCurrent monitor with cut-offCurrent monitor with cut-off
DOWNLOAD FULL DATASHEET

Examples of N-150 with lifting tools

A battery powered lift for lifting and turning drums. The drum is held with grippers attached to scissor lifting clamps, which together with a rotation tool allows for the drum to be turned sideways.
A lightweight roll lifting device with a rotation option. The roll is grabbed by scissor lift clamps and held in place by two rubber padded grippers.
Specialised lift equipment for handling extra long rolls. The roll here is handled via an elongated single mandrel.
A lightweight pallet lifter equipped with a fork and half a Euro-pallet with 5 cardboard boxes.
Smart handling system for extruder units in crayon production. 2Lift ApS.
An intelligent material handling lift for lifting and turning boxes. A special double fork will hold the box in place via its edges.
This is the lightweight N-150 vertical lift with no lifter tool mounted on it (seen from the side).
Here is the N-150 electric lift without any lifter tools (seen from the front).
Strong and mobile cylinder handling equipment. A rotation unit along with a scissor lifting clamp and grippers allows for turning the cylinder sideways.
An easily maneuverable drum handler with rotation possibility. Grippers on a scissor lift clamp hold the drum firmly on the sides.
The N-150 material handling machine seen with no tools and from the back.
Lightweight and strong industrial lifting equipment for demanding environments.
A battery powered lift for lifting and turning drums. The drum is held with grippers attached to scissor lifting clamps, which together with a rotation tool allows for the drum to be turned sideways.
A lightweight roll lifting device with a rotation option. The roll is grabbed by scissor lift clamps and held in place by two rubber padded grippers.
Specialised lift equipment for handling extra long rolls. The roll here is handled via an elongated single mandrel.
A lightweight pallet lifter equipped with a fork and half a Euro-pallet with 5 cardboard boxes.
Smart handling system for extruder units in crayon production. 2Lift ApS.
An intelligent material handling lift for lifting and turning boxes. A special double fork will hold the box in place via its edges.
This is the lightweight N-150 vertical lift with no lifter tool mounted on it (seen from the side).
Here is the N-150 electric lift without any lifter tools (seen from the front).
Strong and mobile cylinder handling equipment. A rotation unit along with a scissor lifting clamp and grippers allows for turning the cylinder sideways.
An easily maneuverable drum handler with rotation possibility. Grippers on a scissor lift clamp hold the drum firmly on the sides.
The N-150 material handling machine seen with no tools and from the back.
Lightweight and strong industrial lifting equipment for demanding environments.

For lifters with other load capacities on the N-Line, see our N-300 page or N-500 page.

Go to our N-Line page for more general information on this line.

Go to our Lifters page for a more detailed overview of our lifter lines.

Go to our Products page to find out how our products may help you in your line of industry and your work situation.

Go to our Homepage.